RotorWay Exec 162F Specifications download pdf (Page 17)

RotorWay International

Exec 162F Maintenance Manual

Section 6: Control Assemblies

The Control Assemblies of the EXEC 162F helicopter transfer control inputs from the pilot and passenger to the associated

location on the helicopter. The four areas that require control inputs are:

A. Directional Controls

B. Cyclic Controls

C. Collective Controls

D. Throttle Controls

Coordinated inputs of these controls allow the pilot to maintain control of the helicopter throughout all maneuvers.

Reference prints: E14-2000, E15-2000, E16-2000, E17-2000, E17-2001, E49-2002

SERVICE NOTES:

1. Remove the cross shaft bushing (part no. E16-6131) by clipping the safety wire from the bolt (part no. E00-2501) and

then removing the bolt. Drill out the rivets that attach the bushing to the bracket on the airframe. Lift up on the end of

the foot pedal cross shaft (part no. E16-3101) just enough to remove the cross shaft bushing. Clean the bushing,

apply a small amount of grease and reassemble. Re-torque and safety wire the bolt, and pop rivet the bushing to the

bracket. Perform this procedure for both pilot and passenger sides.

2. Remove the scissor mount bushing (part no. E16-6130) by removing bolt (part no. E16-2406). Lower the bushing

away from the scissor beam (part no. E16-3120). Clean, grease lightly, and reassemble. Check clearance between

head of bolt (part no. E16-2406) and front airframe tube. There should be a minimum of 1/16" clearance. If proper

clearance cannot be obtained, shim under nylon scissor beam pivot bushing (part no. E16-6120) to achieve clearance.

INSPECTION CHART

PART NO.

Directional Control

E16-6131 Cross Shaft Bushing 1000 HR 2000 HR 6-1

E16-6130 Scissor Mount Bushing 1000 HR 2000 HR 6-2

E16-1200 3/16" Female Rod End 100 HR 1000 HR/OC 6-3

E16-1130 1/4" Male Rod End 100 HR 1000 HR/OC 6-4

E16-1140 1/4" Female Rod End 100 HR 1000 HR/OC 6-4

E16-1212 Directional Control Cable 100 HR 2000 HR/OC 6-5

Cyclic Control

E14-6131 Cross Shaft Bushing 1000 HR 2000 HR 6-6

E14-1241 Nylon Bushing 1000 HR 2000 HR 6-7

E14-1150 5/16" Male Rod End 100 HR 2000 HR/OC 6-8

E14-1211 Cyclic Control Cable 100 HR 2000 HR/OC 6-9

E14-1221 Cyclic Control Cable 100 HR 2000 HR/OC 6-9

Collective Control

E15-6131 Cross Shaft Mount Bushing 1000 HR 2000 HR 6-10

E15-1230 5/16" Male Rod End 100 HR 2000 HR/OC 6-11

E15-6130 Collective Rod End Plug 100 HR 2000 HR/OC

E49-1400 Collective Control Rod 100 HR 2000 HR/OC

Throttle Control

E15-3150 Pilot Throttle Shaft 1000 HR 2000 HR 6-12

E15-3170 Transfer Shaft 1000 HR 2000 HR 6-13

E15-9021 Throttle Shaft Weldment 1000 HR 2000 HR 6-14

E15-1150 1/4" Male Rod End 100 HR 2000 HR/OC 6-15

E24-7531 Throttle Cable Assembly 100 HR 500 HR/OC

DESCRIPTION

SERVICE

REFERENCE

INSPECTION

INTERVAL

R.C.O.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 90 91

Comments to this Manuals

No comments

RotorWay Exec 162F Specifications Page 17

Comments to this Manuals

Related products and manuals for Toys & accessories RotorWay Exec 162F